Metal Polish System

SKAI METAL POLISH FOR BRIGHTWORK

Boeing D6-17487 Approved

Skai Metal Polish is designed to polish and restore aluminum or stainless steel to a mirror image. Used for polishing aircraft leading edges, spinners, engine inlets, thrust reversers and bare aluminum skins. Also safe for use on aircraft paint for removing heavy oxidation and stains. Skai Metal Polish is also very economical. Skai makes very little mess when polishing and will not sling over the aircraft if used properly. Skai is non-abrasive, fast cutting and quick to clear under a buffer. Surfaces treated with Skai are protected and resistant to oxidation.Meets Boeing, McDonnell Douglas And AMS Approvals. Non-Hazardous, Non-Flammable, Biodegradable.

Skai Metal Polish - MSDS

MIRROR IMAGE SWIRL REMOVER FOR BRIGHTWORK

Removes Swirls and Seals Aluminum

Mirror Image Bright Work Swirl Remover is designed to remove swirls in polished metal caused by machine buffing. Mirror Image can also be used as a light maintenance polish between machine polishing jobs. Contains corrosion inhibitors and anti-oxidation agents for long lasting protection on all polished metal. Mirror Image will produce 100% protection while sealing the polished metal. Removes Swirls In Polished Metal, Contains Corrosion Inhibitors And Anti-Oxidation Agents, Great Maintenance Polish.

Mirror Image - MSDS

Red Rouge Bar

Will Cut & Clear When Nothing Else Will

Rouge makes a mess when polishing aluminum but when all else fells to clear your leading edges its time to get out the rouge bars. We discovered the ability of this red rouge on a G-4 that had set out in Saudi Arabia for two years, the leading edges had the appearance and feel of concrete. The rouge was the only thing we found that would clear the metal to a perfect mirror image. We recommend always having a few bars around because you never know when you will need them. One of these 2.5 Lb bars will get through one or two Gulfstreams depending on what shape the metal is in.

Green Rouge Bar

Will Brighten & Finish Out The Aluminum Surfaces Being Buffed.

This Green Rouge Bar will bring out a brilliant shine and clarity to the surface of the aluminum you are buffing. Should be used with red rouge bar for finish out brightwork job. This bar is considered a finishing rouge which brings out the best color to the aluminum surface being polished. Green Rouge Bars are also needed when certain stubborn aircrafts refuse to brighten up after polishing.

JET STREAM METAL POLISH KIT ONE

Jet Stream's Metal Polish Kit 1 has been designed to make polishing and maintaining aircraft leading edges simple and fast. You will achieve fantastic results in half the time when compared to our competitors products with less mess.

• 1 Skai Metal Polish
• 2 Mirror Image
• 2 Microfiber Towels
• 2 Microfiber Applicators

JET STREAM'S METAL POLISH KIT TWO

Jet Stream's Metal Polish Kit 2 was designed for the aircraft detailer or larger flight departments. You will have everything required to bring out the best in aircraft brightwork on any size aircraft.

• 2 Skai Metal Polish
• 4 Mirror Image
• 6 Microfiber Applicators

• 36 Microfiber Towels
• 6 Wool Buffing Pads 7-1/2 "
• 1 Spur Tool
• 1 Red Rouge 2.5 Lb Bar

BUFFING PADS

Buffing Pads are made from 100% wool with a 1-1/2 inch pile. These pads can be used for all of your brightwork and paint polishing needs and will cut through oxidation quickly and wear evenly for extremely smooth polishing. These buffing pads can also be washed and re-used multiple times. They do have a velcro backing and are designed to be used with a threaded nut or a Velcro backing plate.100% Virgin wool, Quick Cutting Pads, Washable, Extremely Smooth.

MICROFIBER TOWELS

Scratch Free, Super Absorbent Finishing Cloth For Metal.

MicroFiber towels are outstanding for polishing aircraft brightwork and meets all flight department safety requirements. MicroFiber fabric is 100 times finer than human hair and has ninety thousand micro fibers per square inch. This makes for superior durability, ultra soft, scratch free and streak free. Wash and reuse.

POLISHING APPLICATORS

Truly A High Quality Product Not Easily Found In Retail Stores.

Soft 100% micro fiber five inch diameter wax applicators are extremely durable, with double stitched seams, over a foam disc. These wax applicators are a must when polishing or dry washing an aircraft using Flyers Speed Wax. Applicators can be washed and reused numerous times.

VELCRO BACKING PLATE

Make Changing Pads A Snap, Improves Pads Ability To Cut Oxidation.

This plate is designed to be used with the above buffing pad. The hook and loop design makes changing pads fast and simple. Rigid construction helps when removing oxidationout of paint or metal. Standard thread fits Makita, Dewalt, Hitachi and many other buffers.

BUFFING PAD CLEANER TOOL

This Tool Will Increase The Life Of Your Buffing Pads As It Cleans Quickly And Efficiently.

Absolutely a must tool when buffing. The Buffing Pad Spur Cleaner is used to break down compound build-up without removing the pad from the machine polisher. When buffing, pad fills up with polishing compounds not allowing the pad to perform properly. The Buffing Pad Spur Cleaner will quickly and efficiently remove this build-up, restoring the pad to it’s full potential.

POLISHING BRIGHTWORK is the hardest task anyone can perform when detailing an aircraft. Many products claim to be the easiest to use, but the results can be frustrating. We know how to do Brightwork the right way and have the products to prove it! Read below about all of the products and accessories that will give you the best results guaranteed.

Click Here to View Complete MANUAL on Metal Polishing Procedures!